Slime drying equipment dust problem must be considered a problem, as it relates to environmental issues, good dust treatment is to protect their own living environment. General, Ink precipitator dust control measures are adopted, the cyclone like equipment and handling of dust and exhaust, as well as good internal transformation to the dust-proof. This requires the designer has a wealth of experience to go through a lot of trials so as to formulate a viable rehabilitation programs, Cheng Xiang technicians based on years of production experience summed up a set of effective programs, and applied to the drying machine above, greatly reducing the exclusion of dust. 1, increased gold off negative pressure, high temperature gas into the dryer to quickly dehumidification, and then discharged, as much as possible to reduce the exhaust gas concentration in the cylinder body, fast drying purpose. 2, transformation of the feed tube, the lower discharge port to improve, the slime naturally falling material curtain is formed, so that with the high temperature gas can more fully released, the thermal efficiency. 3, increasing the curvature of the lifting plate, in this case will be able to increase the height of the material raised sufficient contact with the hot gas in the air, in this case, drying of the more thoroughly. After the above three steps, your slime drying equipment dust problems can be fully resolved. Zhengzhou City, Cheng Xiang Machinery Co., Ltd. is located in Yong'an Road, Gongyi City, the company's main products are metal grinder, three drum dryer cans grinder, slime drying equipment, fly ash dryer, liquid brick press, unburned brick machine, sand making machine and other equipment, the company's main website http://www.hnzzzh.com/ http://www.gycxjc.com/ http://www.gycxjx.com/ http://www.mszzj . com http://www.jyzsj.com/ www.cxtaolisha.com